Basic Operation
OPERATION GUIDE 3-27
3
Send as E-mail
Sends a scanned original image as an E-mail attachment.
NOTE:
• You must have a network environment in which this machine can
connect to a mail server. It is recommended that the machine be used
in an environment in which it can connect to the mail server at any time
over a LAN.
• Register the IP address and SMTP server host name in EWS
(Embedded Web Server) beforehand. For details, see Accessing
EWS (Settings for Network and Transmission) on page 2-12.
1
Place the originals on the
platen or in the optional
document processor.
NOTE: For loading instructions, refer to Loading Originals on page 2-47.
2
Press the Send key.
3
Press [E-mail Addr Entry] and then [E-mail Address].
NOTE: Destination can be specified using the Address Book or the One-
touch Keys. Refer to Specifying Destination on page 3-42.
To Next Page