Olivetti d-Copia 3000MF - Adjusting Density; Density Adjustment

Basic Operation
OPERATION GUIDE 3-11
3
Adjusting Density
Use this procedure to adjust the density when copying.
The procedure for adjusting the density of copies is explained below.
1
Set the original on
the platen and press
[Image Quality] ->
[Density].
2
Adjust density manually pressing [-3] (Lighter) to [+3] (Darker). You can
change the density level [-3] (Lighter) to [+3] (Darker) in half-steps.
To change density
adjustment from
Manual to Auto,
press [Auto].
3
Press [OK].
4
Press the Start key. Copying begins.
Density Adjustment
Option
Description
Manual Adjust density using 7 or 13 levels.
Auto Optimum density is selected according to the
density of the original.
Status 10/10/2007 10:10
Image
Quality
Set Original.
Copy Image
Org./Paper/
Finishing
Quick Setup Layout/Edit Advanced
Setup
Density
Copies
Original
Image
EcoPrint
1
Original
Zoom
Paper
100%
---
:
:
:
---
Ready to copy.
Preview
Status 10/10/2007 10:10
Ready to copy.
Press [OK] to display
-3
Auto
Cancel OKAdd Shortcut
-2 -1 0 +1 +2 +3
-2.5 -1.5 -0.5 +0.5 +1.5 +2.5
Density
Lighter Normal Darker
Copies
1
the image.