211
EN
Customizing the Camera
6
Role Function
HDR
(K only)
Enable HDR (P. 162). Press once to enable HDR. Press again to
disable. Hold the button and rotate the front or rear dial to adjust HDR
settings, including HDR bracketing.
ISO
Adjust [ISO] settings (P. 113). Hold the control and rotate the front
or rear dial. Alternatively, you can press the button to activate settings
and then rotate the dials. Use the front or rear dial or HI to adjust
settings.
WB (white
balance)
Adjust [WB] settings (P. 150). Hold the control and rotate the front or
rear dial. Alternatively, you can press the button to activate settings
and then rotate the dials. Use the front or rear dial or HI to adjust
settings.
Multi Function
(Multi Fn)
Conîš¿gure the control for use as a multi-function button (P. 215).
Hold the control and rotate the front or rear dial to choose the
function performed. The selected function can be performed by
pressing the control.
Peaking (Peak)
Toggle focus peaking on or o󰀨 (P. 103). Press the control once to
turn peaking on and again to turn it o󰀨. When peaking is on, peaking
options (color, amount) can be displayed by pressing the INFO
button.
VLevel Disp
(
)
Display the digital level gauge. The exposure bar display in the
viewîš¿nder functions as a level gauge. Press the control again to exit.
This option takes e󰀨ect when [VStyle 1] or [VStyle 2] is selected
for [EVF Style] (P. 228).
u View
Selection (u)
(display selection)
Switch between viewnder photography and live view. If [O󰀨] is
selected for [EVF Auto Switch] (P. 250), the display will switch
between the viewîš¿nder and the monitor. Press and hold the control to
display [EVF Auto Switch] options.
LV Mode (S-OVF)
(K only)
Switches [LV Mode] (P. 225)between [Standard] and [S-OVF].
AF Limiter
(AFLimit)
(K only)
Enable the AF limiter (P. 92). Press once to enable [AF Limiter].
Press again to disable. Hold the button and rotate the front or rear
dial to choose from three stored settings.
Preset MF
(Preb)
Set [AF Mode] to [Preb] (P. 72). Press the control once to
enable preset MF and again to restore the previous focus mode.
Alternatively, you can choose the [AF Mode] by holding the control
and rotating a dial.
Lens Info Settings
(sLens)
Recall previously-saved lens data (P. 246). Recall saved data for the
current lens after changing lenses or the like.
IS Mode (IS)
Toggle [Image Stabilizer] on or o󰀨 (P. 136). Press once to select
[O󰀨] and again to turn image stabilization on. Hold the control and
rotate the front or rear dial to access [Image Stabilizer] options.
Flicker Scan
(Flicker Scan)
Adjust settings for [Flicker Scan] (P. 108). Press the control to select
[On]. You can adjust shutter speed for best results while viewing
banding in the display. Press the control again to display shooting
information and access other settings. Press and hold the control to
select [O󰀨] for [Flicker Scan].
To Next Page
Loading...
Need help?
General
