EasyManua.ls Logo

Olympus OM System OM-1 - Page 220

Olympus OM System OM-1
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
220
EN
Customizing the Camera
6
Conguring [KFn Lever Function]
1
Select [KFn Lever Function] on the [Fn Lever
Settings] screen and press the Q button.
MENU
OK
INFO
HH
mode1
mode2 mode3
Switches AF mode/AF target mode/
AF target point according
to Fn lever position.
Target can be selected.
Off
K
Fn Lever Function
K
Fn Lever Function screen
O󰀨 Changing the position of the Fn lever has no e󰀨ect.
mode1
Switch the functions of the front and rear dials. The functions
for Positions 1 and 2 conform to the setting selected for [KDial
Function] (P. 216).
mode2
Switch between two groups of settings previously selected for [AF
Mode], [AF Target Mode], and [AF Target Point].
Press the INFO button and put a check (v) next to a setting that
you want to recall with the Fn lever.
To remove the check, press the Q button again.
[AF Mode]: S-AF, C-AF, etc.
[AF Target Mode]: MSingle, oAll, etc.
[AF Target Point]: The position of AF target.
mode3
Toggle the shooting mode. You can switch to
n
(movie) mode
without rotating the mode dial.
# When [mode3] is selected, [nFn Lever Function] cannot be used (P. 221).
# This function cannot be used in the following cases.
- [Fn Lever/Power Lever] (P. 222) is set to [ON/OFF] or [OFF/ON].
Conguring [nFn Lever Function]
1
Select [nFn Lever Function] on the [Fn Lever
Settings] screen and press the Q button.
MENU
OK
INFO
HH
mode1 mode2
Switches AF mode/AF target mode/
AF target point according
to Fn lever position.
Target can be selected.
n
Fn Lever Function
Off
nFn Lever Function screen
O󰀨 Changing the position of the Fn lever has no e󰀨ect.
mode1
Switch the functions of the front and rear dials. The functions
for Positions 1 and 2 conform to the setting selected for [nDial
Function] (P. 216).
mode2
Switch between two groups of settings previously selected for [AF
Mode], [AF Target Mode], and [AF Target Point].
Press the INFO button and put a check (v) next to a setting that
you want to recall with the Fn lever.
To remove the check, press the Q button again.
[AF Mode]: S-AF, C-AF, etc.
[AF Target Mode]: ySmall, oAll, etc.
[AF Target Point]: AF-target position

Table of Contents

Related product manuals