273
EN
Connecting the Camera to External Devices
8
îš„ Connecting Manually (Connect manually)
Adjust network settings manually. You will need to provide:
Menu
MENU n e n 4. Wi-Fi/Bluetooth n Wi-Fi Connection
SSID The network name (SSID).
Authentication The type of security used on the network.
Password The password for connection to a secured network.
IP Address Assign
Choose whether the camera IP address is assigned automatically by
the network DHCP server.
IP Address
These îš¿elds are required when the IP address is assigned manually.
The settings used vary with the network.
Subnet Mask
Default Gateway
DNS
1
Highlight [PC Connection] using the FG buttons and press the Q button.
• [PC Connection] options will be displayed.
2
Highlight [Connect manually] using the FG buttons and press the Q
button.
3
Highlight items using the FG buttons and press the Q button.
• Options for the selected item will be displayed.
SSID Enter the network SSID.
Authentication
Select the type of security used on the network. Choose from
[None], [WPA2/WPA3] and [WPA3].
Password
If you selected [WPA2/WPA3] or [WPA3] for [Authentication],
enter the network password.
IP Address Assign
Choose from [Auto(DHCP)] and [Manual]. Automatic IP address
assignment requires a network with a DHCP server conîš¿gured to
supply IP addresses automatically.
IP Address
These îš¿elds are required when [Manual] is selected for [IP
Address Assign].
Subnet Mask
Default Gateway
DNS
4
Highlight [Start Connection] using the FG buttons and press the Q button.
To Next Page
Loading...
Need help?
General
