Olympus OM System OM-1 - Page 274

274 EN
Connecting the Camera to External Devices
8
5
If the camera is able to connect, the network will
be displayed with a check (v) next to the network
name.
• If the camera has been paired with more than one computer,
you will be prompted to choose a computer before the
network is displayed. Highlight the desired computer using
the FG buttons and press the Q button.
• The camera can be used only with the selected
computer. To select a di󰀨erent computer, you must rst
terminate the current connection.
MENU
SSID_001
OK
HH
]
U
t
O
Connect by WPS
Connect manually
PC Connection
• If the connection fails, the camera will display a
message to that e󰀨ect, followed by the options shown in
Step 4. Repeat Steps 4–5.
100 % 100 %
Connection failed
6
Press the Q button to exit to the shooting display.
• Standard shooting indicators will be displayed. O on
the screen will turn green.
O
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
200200
L
1
4K
ISO
Auto
ISO
Auto
F
00
+
-
0.00.0
100 % 100 %
rr
OO
 Choosing a Network from a List (Connect from Access Point List)
The camera will search for available networks and display them in a list from which you
can choose the network to which you wish to connect.
Menu
MENU n e n 4. Wi-Fi/Bluetooth n Wi-Fi Connection
1
Highlight [PC Connection] using the FG buttons and press the Q button.
• [PC Connection] options will be displayed.
2
Highlight [Connect from T List] using the FG buttons and press the Q
button.
• A list of available networks will be displayed.
3
Highlight the desired network using the FG buttons and press the Q
button.
• If the network is password-protected, you will be prompted to enter a password. Enter
the password and press the Q button.
• Press the I button to display [Detail Settings] for the highlighted network. You can
enter an IP address and adjust other settings manually.
• Press the R button to repeat the search and update the network list.