Olympus OM System OM-1 - Page 275

275 EN
Connecting the Camera to External Devices
8
4
If the camera is able to connect, the network will be displayed with a check
(v) next to the network name.
• Password-protected networks are indicated by a t icon.
• If the camera has been paired with more than one computer, you will be prompted to
choose a computer before the network is displayed. Highlight the desired computer
using the FG buttons and press the Q button.
• The camera can be used only with the selected computer. To select a di󰀨erent
computer, you must rst terminate the current connection.
• If the connection fails, the camera will display a
message to that e󰀨ect, followed by the options shown in
Step 3. Repeat Steps 3–4.
10
0 %
10
0 %
Connection failed
5
Press the Q button to exit to the shooting display.
• Standard shooting indicators will be displayed. O on
the screen will turn green.
O
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
200200
L
1
4K
ISO
Auto
ISO
Auto
F
00
+
-
0.00.0
10
0 %
10
0 %
rr
OO
! Connecting to Previously-Selected Networks
• The camera will automatically reconnect to previously-selected networks when you select
[PC Connection] via the rO icon. You will not be required to supply a password.
• If multiple networks are available, the camera will connect rst to the most recently-used
network.
• Once the camera has connected, it will display a list of available networks with the current
network shown by a check mark v.
• To connect to a di󰀨erent network, highlight it in the list and press the Q button.
• If the camera has been paired with more than one computer on the network, you will be
prompted to choose a computer before the network list is displayed. Highlight the desired
computer using the FG buttons and press the Q button.