165
Programming Devices Section 3-3
CX-Programmer Connecting Cables
Cables Connecting to CPU Units
Cables Connecting to Serial Communications Boards/Units
Note The CX-Programmer can be used for remote programming and monitoring. It
can be used to program and monitor not only the PLC to which it is directly
connected, but also to program and monitor any PLC connected through a
Controller Link or Ethernet network to which the PLC that the CX-Programmer
is connected to is a part of. All programming and monitoring functionality for
the directly connected PLC is supported for remote programming and moni-
toring, the PLC can be connected though either the peripheral or an RS-232C
port, and either the peripheral bus or Host Link bus can be used. Remote pro-
gramming is possible for up to three levels of networks (counting the local net-
work but not counting the peripheral bus or Host Link connection between the
CX-Programmer and the local PLC).
USB
Con-
necting
Cable
Model
Cable 1 Cable 2 Unit port Serial
communications
mode
(network)
Connec-
tor
Cable model Connec-
tor
Connec-
tor
Cable model Connec-
tor
CS1W-
CIF31
D-sub, 9-
pin
female
CS1W-CN226/626
(length: 2 m/6 m)
CS/CJ-
series
periph-
eral
Not required. CS/CJ-
series
periph-
eral
Peripheral Bus
(Toolbus) or Host
Link (SYSWAY)
CQM1-CIF02
(length: 3.3 m)
C-series
periph-
eral
C-series
periph-
eral
CS1W-CN114
(length: 5 cm)
CS/CJ-
series
periph-
eral
Host Link
(SYSWAY)
XW2Z-200S-V/
500S-V (length: 2 m/
5 m)
D-sub, 9-
pin male
D-sub, 9-
pin
female
CS1W-CN118
(length: 0.1 m)
CS/CJ-
series
periph-
eral
Peripheral Bus
(Toolbus) or Host
Link (SYSWAY)
XW2Z-200S-V/
500S-V (length: 2 m/
5 m)
D-sub, 9-
pin male
D-sub, 9-
pin
female
CS1W-CN118
(length: 0.1 m)
CS/CJ-
series
periph-
eral
Host Link
(SYSWAY)
XW2Z-200S-CV/
500S-CV (length:
2m/5 m)
RS-232C
D-sub, 9-
pin male
Not required. RS-232C
D-sub, 9-
pin
female
Peripheral Bus
(Toolbus) or Host
Link (SYSWAY)
XW2Z-200S-V/
500S-V (length: 2 m/
5 m)
RS-232C
D-sub, 9-
pin male
Not required.
Host Link
(SYSWAY)
USB
Con-
necting
Cable
Model
Cable 1 Cable 2 Unit port Serial
communications
mode
(network)
Connec-
tor
Cable model Connec-
tor
CS1W-
CIF31
D-sub, 9-
pin
female
XW2Z-200S-CV/
500S-CV (length:
2m/5 m)
RS-232C
D-sub, 9-
pin male
Not required. RS-232C
D-sub, 9-
pin
female
Host Link
(SYSWAY)
CS1W-
CIF31
D-sub, 9-
pin
female
XW2Z-200S-V/
500S-V (length: 2 m/
5 m)
RS-232C
D-sub, 9-
pin male
Not required.
To Next Page
Loading...
