214
Examples Section 4-2
4. Verify that the CX-Programmer has connected online with the PLC.
5. Change the operating mode from RUN mode to PROGRAM mode.
Connecting to the Programming Console
1. Connect the Programming Console to the CPU Unit's peripheral port (the
upper port).
2. Verify that the Programming Console's mode is PROGRAM mode.
3. After checking the power supply wiring and voltage, turn ON the power and
verify the Power Supply Unit's POWER Indicator is lit.
4. Verify that the Programming Console has the following display.
5. Input the password (the Clear and Monitor Keys) and verify that the Pro-
gramming Console has the following display.
EAR MIC
Programming
Console
<PRG> 3:JPN~ENG
PASSWORD!
To Next Page
Loading...
