EasyManua.ls Logo

Omron CJ - 08-2008 - Page 461

Omron CJ - 08-2008
733 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
413
Auxiliary Area Section 9-11
Auxiliary Area Flags and Bits for Built-in Inputs
The following tables show the Auxiliary Area words and bits that are related to
the CJ1M CPU Unit's built-in inputs. These allocations apply to CPU Units
equipped with the built-in I/O only.
Interrupt Inputs
Name Address Description Read/Write Times when data is
accessed
Interrupt Counter 0
Counter SV
A532 Used for interrupt input 0 in counter mode.
Sets the count value at which the interrupt task
will start. Interrupt task 140 will start when inter-
rupt counter 0 has counted this number of
pulses.
Read/Write Retained when
power is turned
ON.
Retained when
operation starts.
Interrupt Counter 1
Counter SV
A533 Used for interrupt input 1 in counter mode.
Sets the count value at which the interrupt task
will start. Interrupt task 141 will start when inter-
rupt counter 1 has counted this number of
pulses.
Read/Write
Interrupt Counter 2
Counter SV
A534 Used for interrupt input 2 in counter mode.
Sets the count value at which the interrupt task
will start. Interrupt task 142 will start when inter-
rupt counter 2 has counted this number of
pulses.
Read/Write
Interrupt Counter 3
Counter SV
A535 Used for interrupt input 3 in counter mode.
Sets the count value at which the interrupt task
will start. Interrupt task 143 will start when inter-
rupt counter 3 has counted this number of
pulses.
Read/Write
Interrupt Counter 0
Counter PV
A536 These words contain the interrupt counter PVs
for interrupt inputs operating in counter mode.
In increment mode, the counter PV starts incre-
menting from 0. When the counter PV reaches
the counter SV, the PV is automatically reset to
0.
In decrement mode, the counter PV starts dec-
rementing from the counter SV. When the
counter PV reaches the 0, the PV is automati-
cally reset to the SV.
Read/Write Retained when
power is turned
ON.
Cleared when
operation starts.
Refreshed when
interrupt is gener-
ated.
Refreshed when
INI(880) instruc-
tion is executed.
Interrupt Counter 1
Counter PV
A537 Read/Write
Interrupt Counter 2
Counter PV
A538 Read/Write
Interrupt Counter 3
Counter PV
A539 Read/Write

Table of Contents

Related product manuals