565
Specifications of Basic I/O Units Appendix A
CJ1W-OC201 Contact Output Unit (Terminal Block, 8 Points)
Note Although 16 I/O bits (1 word) are allocated, only 8 of these can be used
for external I/O. This Unit is also treated as a 16-point I/O Unit in the I/O
tables.
Circuit Configuration
Max. Switching Capacity 2 A 250 V AC (cosφ = 1), 2 A 250 V AC (cosφ = 0.4),
2 A 24 V DC (16 A/Unit)
Min. Switching Capacity 1 mA 5 V DC
Service Life of Relay Electrical: 150,000 operations (24 V DC, resistive
load)/ 100,000 operations (240 V AC, cosφ = 0.4,
inductive load)
Mechanical: 20,000,000 operations
Service life will vary depending on the connected
load. Refer to page 586 for information on service life
according to the load.
Relay replacement NY-24W-K-IE (Fujitsu Takamizawa Component Ltd.)
Relays cannot be replaced by users.
ON Response Time 15 ms max.
OFF Response Time 15 ms max.
Number of Circuits 8 independent contacts
Insulation Resistance 20 MΩ between external terminals and the GR termi-
nal (500 V DC)
Dielectric Strength 2,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
Internal Current Consumption 90 mA 5 V DC max. 48 mA 24 V DC (6 mA × No.
points ON)
Weight 140 g max.
Output indicator
Internal circuits
To Next Page
Loading...
