682
Revision History
05 September 2003 Basic I/O Units (CJ1W-ID201/OD203/OD204/OD262/MD232) and Analog I/O Units
(CJ1W-DA08V/MAD42) were added at various places throughout the manual. Extensive
changes throughout the manual include corrections, changes, and additions on the follow-
ing pages:
Page 38: Corrected bits “A53102” and “A53103” to “A53108” and “A53109,” respectively.
Page 39: Added note on transmission length
Page 44: Corrected current consumption from “0.82” to “0.99” and from “0.78” to “0.91.”
“Asynchronous” corrected to “synchronous” in common specifications table.
Page 48: Changed EM Area to “7 banks max.: E0_00000 to E6_32767 max.”
Page 52: Changed information for Serial PLC Link.
Page 59: Changed “left” to “right” in note.
Page 61: Corrected “32 Kwords” to “64 Kwords” for CJ1G-CPU43H/CPU42H data mem-
ory size.
Page 66: Changed “CPU Rack” to “Expansion Rack” in rack configurations table.
Page 67, 124: Corrected “DC” to “AC” in specifications for AC Input Units.
Page 68: Changed “output” to “input” in Note 2.
Page 87: Removed “CX/Programmer” from table.
Page 88: Removed note from CJ-series Communications Adapters table.
Page 89: Corrected “Output” to “Input” for AC Input Units.
Page 108: Corrected “right” to “left” in step 2.
Page 109: Corrected “Remove” to “Install” in step 4.
Page 124: Added new Units to table and removed output specifications for Transistor Out-
put Unit.
Page 126: Removed “CJ1” from subheading of Application Precautions.
Page 135, 136: Corrected “G79-I@-@-DI” to “G79-O@-@-D1” and also changed final “I” to
“1” in other Connecting Cable model numbers.
Page 143: Corrected “n+4” to “n+3” in table.
Page 171: Corrected “100 to 240” to “24” for the CJ1W-PD025.
Page 185: Changed “CPU Unit” to “I/O Interface Unit” in diagram.
Page 187: Corrected “28-15x4.5” to “28-25x4” in diagram.
Pages 191, 192, 193, 195: Changed “M3.5” to “M4” self-raising terminals.
Pages 195, 196: Corrected “Power Supply Unit” to “I/O Unit” for information on crimp ter-
minals.
Page 196: Changed “3.5 mm” to “M3” in diagram and changed related sentence above.
Page 198: Changed “32” to “64” for CJ1W-OD261
Page 207: Changed “AC/DC” to “DC” and “voltage current” to “voltage” in diagram.
Page 214: Swapped ON/OFF functions for pin 4 and also for pin 6.
Pages 253, 254: Changed “0 (OFF)” to “1 (ON)” in bottom right box of bottom diagram.
Page 293: Changed “CIO 0079” to “CIO 0159,” “007915” to “015915,” and “1,280 (80
words)” to “2,560 (60 words).”
Page 307: Changed “A08915” to “A06915” in address for Basic I/O Unit Status Area, and
changed description.
Page 355: Removed “RUN” from note 2.
Page 358: Changed note.
Page 362: Modified diagram
Page 368: Corrected “DC” to “AC” in table for CJ1W-IA201
Page 374: Changed top diagram.
Page 408: Corrected “CS1” to “CJ1” in diagram
Page 423: Changed diagram.
Pages 439, 440: Reworked tables and added notes.
Page 442: Changed diagram and added note.
Pages 443, 445, 447, 448, 449: Changed and added notes.
Pages 449, 450: Corrected “100 V DC” to “500 V DC” in table.
Pages 452, 453, 455, 457, 459, 461, 463, 464: Added/changed notes
Pages 464, 465, 466: Corrected “100 V DC” to “500 V DC” in table.
Pages 466, 467: Added notes.
Page 468: Diagram changed.
Pages 470, 471, 473,475, 478: Changed and added notes.
Page 474: Changed diagram. Corrected “62” to “64” in heading.
Page 486: Corrected “3.0 s” to “3.0
µs” in diagram.
Page 487: Corrected “open collector inputs” to “open collector outputs.”
Page 527: Corrected “Bank C” to “Bank 7” in diagram.
Page 530: Added row to table and note.
Page 548: Added note and information on RS-232C port connections.
Page 555: Added block diagram.
Page 559: Changed diagram.
Revision code Date Revised content
To Next Page
Loading...
