98
Creating and Using User-defined Function Blocks Section 6-5
6-5-2 Specifications
The specifications of user-defined function blocks are given below.
6-5-3 Operation Rights
Operation rights for user-defined function blocks include a password and acti-
vation key. Restrictions in user-defined function block operations are given
below.
An activation key is used to prevent unintentional importing of user-defined
function blocks.
To set operation rights, right-click the function block that you created in the
Project Window. Operation rights can also be set when creating a new user-
defined function block.
6-5-4 Starting the G9SP Configurator When Manipulating User-defined
Function Blocks
You must have administrator rights to create, edit, save, delete, or import user-
defined function blocks. To achieve this, use the following procedure to start
the G9SP Configurator.
Windows XP
1,2,3... 1. Log on as a user with administrator rights.
2. Start the G9SP Configurator.
Windows Vista or Later
1,2,3... 1. Select Programs (All Programs) - OMRON G9SP Configurator from the
Windows Start Menu.
2. Right-click G9SP Configurator.
3. Select Run as administrator from the pop-up menu that is displayed.
Item Specification
Maximum number of I/O terminals Input terminals: 32, Output terminals: 16
Maximum number of function blocks 128
Maximum number of pages 32
Maximum number of jump tags 64
I/O comment size 48 alphanumeric characters
Nesting user-defined function blocks Not supported
Editable Accessing
and
monitoring
Importing
Passwords Editable OK OK OK
Read only --- OK OK
Activation key --- --- OK
To Next Page
Loading...
