151
Monitoring Devices Section 10-1
10-1-4 Operation Log
Operations that have been performed in the G9SP-series Controller can be
checked in the operation log. Up to 10 operations are stored in the nonvolatile
memory in the G9SP-series Controller. They are still retained even when the
power is turned OFF and back ON. When more than 10 records are stored,
the oldest records are deleted.
Stored Operations
The following operations are stored in the operation log list.
Precautions for Correct Use
Only operations that are completed successfully are saved in the operation
log list.
Display the operation.
Displays the unit ON time when the operation was executed.
Newer
Older
Clears all operations from the operation log.
Used to save the operation log in a CSV-format file.
The operation log is not updated while the Operation Log
List Tab Page is displayed. Always click the Update Button.
Stored operation Description
Power ON or emulating cycling power The G9SP-series Controller was turned ON or reset from the G9SP
Configurator.
Out of box reset The G9SP-series Controller was reset to the default settings.
Download The configuration data was downloaded from the G9SP Configurator.
Lock/Unlock The configuration was locked or unlocked from the G9SP Configurator.
Change Mode The operating mode was changed from the G9SP Configurator.
Start/stop of force mode Force Mode was started or ended from the G9SP Configurator.
Change device password The Device Password was changed from the G9SP Configurator.
Clear error log The error log was cleared from the G9SP Configurator.
Backup to Memory Cassette The configuration data was backed up from the G9SP-series Controller
to the Memory Cassette.
Restore from Memory Cassette Configuration data was restored from the Memory Cassette to the
G9SP-series Controller.
To Next Page
Loading...
