99
Creating and Using User-defined Function Blocks Section 6-5
If you do not have administrator rights, the user account controls will not save
the user-defined function blocks files in a folder that is shared by all users. In
that condition, the user-defined function block files will be saved in a separate
folder for each user and other users will not be able to access them even if
they log on with administrator rights.
6-5-5 Creating User-defined Function Blocks
1,2,3... 1. Right-click User-defined Function Blocks in the Project Window and select
New User-defined Function Block.
2. Enter the name of the user-defined function block, the name of the first
page, and the number of inputs and outputs ("Input/Output count").
3. Click the OK Button.
4. A dialog box will be displayed to set the passwords. Set the editable pass-
word and read only password.
A user-defined function block will be added under User-defined Function
Blocks in the Project Window.
To Next Page
Loading...
