Omron G9SP-N20S - Importing User-Defined Function Blocks

101
Creating and Using User-defined Function Blocks Section 6-5
1,2,3... 1. Right-click the user-defined function block to export in the Project Window
and select Export.
2. Select the location to export and click the Save Button.
3. The Activation Key Dialog Box will be displayed.
Record the activation key and click the OK Button. The activation key is re-
quired to import the user-defined function block.
4. The definition is saved in a user-defined function block file (.udf).
6-5-7 Importing User-defined Function Blocks
User-defined function blocks from other project files can be imported.
1,2,3... 1. Right-click User-defined Function Blocks in the Project Window and select
Import.
2. Select the user-defined function block file (.udf) to import and click the
Open Button.