Omron G9SP-N20S - Expansion I;O Units; Part Names and Indicators

40
Expansion I/O Units Section 2-2
2-2 Expansion I/O Units
This section provides the names of Expansion I/O Unit parts, I/O specifica-
tions, and terminal arrangements. Refer to 4-1 Installation and 4-2 Wiring for
dimensions and weights.
2-2-1 Part Names and Indicators
Part Names and Functions
Standard I/O Units with 20 I/O Points (CP1W-20EDT/20EDT1)
Standard Output Units with 32 I/O Points (CP1W-32ET/ET1)
1. Input terminals
4. Input indicators
3. Output terminals
6. Output indicators
5. Expansion connecto
r
2. Expansion I/O connecting cable
20EDT1
Number Name Function
1 Input terminals Used to connect input devices.
2 Expansion I/O
connecting cable
This cable is used to connect the adjacent Units,
including the G9SP-series Controller, Expansion I/O
Units, or Expansion Units. For extended connections
or vertical arrangements, use the CP1W-CN811 I/O
Connecting Cable (length: 800 mm).
3 Output terminals Used to connect output devices.
4 Input indicators Input status is displayed. An indicator will be ON when
the input is ON.
5 Expansion con-
nector
CP-series Expansion I/O Units can be connected.
1-1-2 Basic System and Configuration Devices
2-2 Expansion I/O Units
6 Output indicators Output status is displayed. An indicator will be ON
when the output is ON.
3. Output terminals
5. Expansion connecto
r
2. Expansion I/O connecting cable
3. Output terminals
6. Output indicators
32ET