EasyManua.ls Logo

Omron G9SP-N20S - Memory Cassette (CP1 W-ME05 M)

Omron G9SP-N20S
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Option Units Section 2-3
Precautions for Correct Use
Only CP1W-CIF41 Ethernet Option Boards with unit version 2.0 or later can
be used. If another Option Board is used, the G9SP-series Controller will
detect an Unsupported Option Board Error (the MS indicator will flash red).
Always turn OFF the power supply to the G9SP-series Controller before
mounting or removing Option Boards.
Communications Specifications
Only the UDP/IP protocol can be used for Ethernet communications with the
G9SP-series Controller. Refer to SECTION 7 Communications with a Stan-
dard PLC Using an Option Board for the communications settings of the con-
nected Standard PLC.
Ethernet Communications Specifications
Note Communications with OMRON PLCs can be performed using the FINS/UDP
protocol.
2-3-3 Memory Cassette (CP1W-ME05M)
Refer to SECTION 11 Backup and Restore Data Using Memory Cassette for
information on using a Memory Cassette with the G9SP-series Controller.
Item Specifications
Type 100Base-TX (can be used as 10Base-T)
Transmis-
sion specifi-
cations
Media access
method
CSMA/CD
Modulation method Baseband
Transmission paths Star form
Baud rate 100 Mbit/s (100Base-TX) 10 Mbit/s (10Base-T)
The internal baud rate between the G9SP-series Controller and Ethernet Option
Board is 115.2 kbps.
Transmission media Unshielded twisted-pair (UTP) cable
Categories: 5, 5e
Shielded twisted-pair (STP) cable
Categories: 100 at 5, 5e
Unshielded twisted-pair (UTP) cable
Categories: 3, 4, 5, 5e
Shielded twisted-pair (STP) cable
Categories: 100 at 3, 4, 5, 5e
Transmission dis-
tance
100 m (distance between hub and node)
Number of cascade
connections
No restrictions in using switching hubs
Current consumption 130 mA max. at 5 V DC
Vibration resistance Conforms to JIS 0040.
10 to 57Hz: 0.075-mm amplitude, 57 to 150 Hz: acceleration 9.8 m/s
2
in X, Y, and Z
directions for 80 minutes each (sweep time: 8 minutes × 10 sweeps = 80 minutes)
Shock resistance Conforms to JIS 0041.
147 m/s
2
, 3 times each in X, Y, and Z directions
Ambient operating temperature 0 to 55°C
Ambient humidity 10% to 90% (with no condensation)
Atmosphere Must be free of corrosive gas.
Ambient storage temperature -20 to 75°C
Weight 23 g max.
Dimensions 36.4×36.4×28.2 mm (W×H×D)

Table of Contents

Related product manuals