Omron G9SP-N20S - Installation

59
Installation Section 4-1
4-1-3 Installation
This section describes how to install the G9SP-series Controller.
Dimensions and Installation Height
Dimensions
Installation Height
The installation height is approximately 90 mm.
When a Connecting Cable is connected to an Option Board, however, the
additional height must be included. Always allow for the additional height
when considering the depth of the control panel in which the G9SP-series
Controller is to be mounted.
Installation Methods
There are two installation methods.
DIN Track Installation
The Units can be mounted to PEP-50N (50 cm) or PEP-100N/100N2 (100
cm) DIN Tracks. Secure the DIN Track with screws in at least three places.
Surface Installation
Units can be directly mounted in the control panel using M4 screws.
Model number A B Weight
G9SP-N10S 86 76 290 g max.
G9SP-N10D 130 120 440 g max.
G9SP-N20S 130 120 430 g max.
8
81
85
A
B
90100110
Four, 4.5 dia.
DIN Track
Secure with screws