Omron G9SP-N20S - 1-1-1 Overview; 1-1-2 Basic System and Configuration Devices

2
Overview and Features of the G9SP-series Controller Section 1-1
1-1 Overview and Features of the G9SP-series Controller
1-1-1 Overview
The G9SP-series Safety Controller is a programmable controller that is
designed for easy operation in small to mid-sized Safety Control systems.
Using the G9SP-series Safety Controller enables building Safety Control sys-
tems that satisfy the requirements for SIL 3 (Safety Integrity Level 3) in IEC
61508 (Safety Standard for Safety Instrumented Systems: Functional Safety
of Electrical/Electronic/Programmable Electronic Safety-related Systems) and
IEC/EN 62061 (Safety of Machinery -- Functional Safety of Safety-related
Electrical, Electronic and Programmable Electronic Control Systems), as well
as safety category 4 and PLe (Performance Level e) in EN ISO 13849-1.
The use of Expansion I/O Units and optional products enables a wide variety
of applications.
1-1-2 Basic System and Configuration Devices
This section describes the basic system configuration for a G9SP-series Con-
troller.
G9SP-N@@@
Computer
G9SP Configurator
Support Software
CP1W-20EDT/EDT1
CP1W-32ET/ET1
USB cable
CP1W-CIF01
CP1W-ME05M
WS02-G9SP@@@
Memory Cassette
G9SP-series
Safety Controller
Expansion I/O Units
The G9SP-series Safety Controller can be
expanded using up to two Expansion I/O Units.
RS-232C
Option Board
Ethernet
Option Board
CP1W-CIF41 (unit version 2.0 or later)
Or
RS-232C or
Ethernet communications
Standard PLC
G9SP-series
Controller
Expansion I/O Units
CP1W-CN811
I/O Connecting Cable

When distance is required between the Units, for example,
when a two-level layout is created using Expansion I/O Units.
MEMORY