Omron G9SP-N20S - Page 29

3
Overview and Features of the G9SP-series Controller Section 1-1
G9SP-series Controller
There are three models of G9SP-series Controllers depending on the number
of Safety I/O points.
Unit Versions of G9SP-series Controller
A “unit version” has been introduced to manage G9SP-series Controllers
according to differences in functionality accompanying Controller upgrades.
• Notation of Unit Versions on Products
The unit version is given to the right of the lot number on the nameplate
of the products for which unit versions are being managed, as shown
below.
• Confirming Unit Versions with the G9SP Configurator (version 1.10 or
higher)
Name/model G9SP-N10S G9SP-N10D G9SP-N20S
Appearance
W66 x H110 x D65 (mm) W130 x H110 x D85 (mm) W130 x H110 x D85 (mm)
Power supply 24 VDC
Program size Function blocks: 128 max.
Number of
I/O points
Safety Inputs 10 points 10 points 20 points
Safety Outputs 4 semiconductor outputs 16 semiconductor outputs 8 semiconductor outputs
Test Outputs 4 points 6 points 6 points
Standard Inputs None None None
Standard Out-
puts
4 semiconductor outputs None None
Expansion using Expansion
I/O Units
Up to 2 Expansion I/O Units can be mounted.
Mounting Option Boards One Option Board can be mounted.
Using Memory Cassettes Supported
Mounting a battery Not supported
Lot No.
G9SP
SAFETY
Lot No. 28705 0000 Ver.1.0
OMRON Corporation MADE IN CHINA
Product nameplate
Unit version
(example for unit version 1.0)
G9SP-series
Safety Controller
CONTROLLER