Omron G9SP-N20S - Page 30

4
Overview and Features of the G9SP-series Controller Section 1-1
You can check the unit version by right-clicking the unit name in the
Project Window and selecting Properties from the G9SP Configura-
tor.
■ Unit Versions
The information provided in this manual applies to all unit versions unless oth-
erwise specified.
Unit version 1.1 or later is certified for the KOSHA S Mark.
Expansion I/O Units
The following four models of CP-series Expansion I/O Units can be used.
The CP1W-CN811 I/O Connecting Cable can also be used.
Option Units
Option Boards
The following two models of CP-series Option Boards can be used.
*1 Communications with an OMRON Standard PLC can be performed using
FINS/UDP.
Memory Cassette
The CP1W-ME05M CP-series Memory Cassette can be used.
Model Model numbers Unit version
G9SP-series Controller G9SP-N@@@ Unit version 1.0
Unit version 1.1
Unit version 2.0
Name/model Unit with 20 Standard I/O points Unit with 32 Standard I/O points
CP1W-20EDT CP1W-20EDT1 CP1W-32ET CP1W-32ET1
Appearance
W86 x H110 x D50 (mm) W150 x H110 x D50 (mm)
Number of I/O
points
Standard Inputs 12 points None
Standard Outputs 8 semiconductor
outputs (sinking)
8 semiconductor
outputs (sourcing)
32 semiconductor
outputs (sinking)
32 semiconductor
outputs (sourcing)
IN
CH
CH
OUT
00 01 02 03
08 09 10 11
04 05 06 07
00 01 02 03 04 05 06 07
CH
CH
EXP
COM 01 03 05 07 09 11
NC 00 02 04 06 08 10
NC 00 01 02 04 05 07
NC COM COM COM 03 COM 06
CH
NC
NC
NC
NC
NC
NC
COM
COM COM COM COM COM COM03 06 01 03 06
00 02 04 06 08 10
00 01 02 04 05 07 00 02 04 05 07
00 02 04 06 08 10
01 03 05 07 09 11 01 03 05 07 09 11
IN
OUT
CH CH
CH CH
EXP
CH
CH
CH
111009080706050403020100
111009080706050403020100
0706050403020100
0706050403020100
Name/model RS-232C Option Board Ethernet Option Board
CP1W-CIF01 CP1W-CIF41
(unit version 2.0 or later)
Appearance
Protocol No-protocol
UDP/IP
*1
COMM
IP ADDRESS:
SUBNET MASK:
COMMERR
10BASE-T
100BASE-TX