xvii
WARNING
Electric shock may occur. Do not touch any terminals while power is being supplied.
Serious injury may possibly occur due to loss of required safety functions. Do not use the
G9SP-series Controller's test outputs or standard outputs as safety outputs.
Serious injury may possibly occur due to loss of required safety functions. Do not use the
G9SP-series Controller's network data as safety data.
Serious injury may possibly occur due to loss of required safety functions. Do not use indica-
tors on the G9SP-series Controller for safety operations.
Serious injury may possibly occur due to breakdown of safety outputs or test outputs. Do not
connect loads beyond the rated values to the safety outputs and test outputs.
Serious injury may possibly occur due to loss of required safety functions. Wire the G9SP-
series Controller properly so that the 24VDC line does NOT touch the outputs accidentally or
unintentionally.
Serious injury may possibly occur due to loss of required safety functions. Ground the 0V line
of the power supply for external output devices so that the devices do NOT turn ON when the
safety output line or the test output line is grounded.
Serious injury may possibly occur due to loss of required safety functions. Perform user testing
and confirm that all of the G9SP-series Controller’s configuration data and operation is correct
before starting system operation.
Serious injury may possibly occur due to loss of required safety functions. When replacing a
G9SP-series Controller, confirm the model of the Controller is correct and configure the
replacement Controller suitably and confirm that it operates correctly.
Serious injury may possibly occur due to loss of required safety functions. Once the data has
been restored from the Memory Cassette, check that the configuration data of the G9SP-series
Controller is correct in that it operates properly and carry out the validation testing (User Test-
ing).
Outputs may operate, possibly resulting in serious injury. Take sufficient safety measures
before force-setting or force-resetting variables in the program.
Serious injury may possibly occur due to loss of required safety functions. Use devices and
parts related to safety functions according to legal regulations in the applicable country. Use
certified items compliant with safety standards corresponding to the intended application.
To Next Page
Loading...
