Omron G9SP-N20S - Page 187

161
Overview Section 11-1
Updating G9SP-series Controller's Configuration Data at Version Upgrade of Existing
Equipment
If updating the G9SP-series Controller's configuration data is required due to
a version upgrade of existing equipment, the new configuration data can be
set (i.e., restored) without using a computer. Once restoring has been com-
pleted and updating has been performed, the G9SP-series Controller will
automatically start to operate in the same way as before updating.
Copying G9SP-series Controller Data for Mass Production of Equipment with
Identical Contents
Identical settings can be easily made to multiple G9SP-series Controllers
using one Memory Cassette when mass production of identical equipment is
performed. Once restoring has been completed, the G9SP-series Controller
will automatically start to operate when the power supply is turned ON.
Precautions for Safe Use
Once restoring data has been completed using the Memory Cassette, the
G9SP-series Controller will automatically start to operate. Be sure to always
turn OFF the power supply to power lines and check system safety before
restoring data with a Memory Cassette.
Precautions for Correct Use
Make sure the power supply of the G9SP-series Controller is OFF when
inserting or removing the Memory Cassette. Inserting or removing the Mem-
ory Cassette while the power is being supplied may cause failure of the
G9SP-series Controller.
Removed
G9SP-series Controller
Before updating
After updating
Insert a Memory Cassette containing the updated
configuration data into the G9SP-series Controller and
start the Controller. The updated configuration data will
be loaded to the Controller to restart operation.
* The configuration data must be backed
up in the Memory Cassette in advance.
MEMORY
MEMORY
Operation can be restarted simply by inserting a
Memory Cassette containing the updated configuration
data into the G9SP-series Controller and starting the
Controller. The updated configuration data will be
loaded to the Controller.
Inserted Inserted
Inserted
G9SP-series Controller
G9SP-series Controller
G9SP-series Controller
* The configuration data must be backed
up in the Memory Cassette in advance.
MEMORY