73
Installation Section 5-2
Windows Vista
The procedure to install the driver on a Windows Vista computer is given in
this section.
1,2,3...
1. Turn ON the power supply to the G9SP-series Controller and connect the
USB port on the G9SP-series Controller to a USB port on the computer
using a USB cable.
The Add Hardware Wizard will also be displayed.
2. Select the Locate and install
driver software Option.
3. Click the Don’t search online
Option in the Found New
Hardware Dialog Box.
4. Select the following: I don’t
have the disc. Show me oth-
er options.
To Next Page
Loading...
