12 Troubleshooting
12 - 48
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
Event name Memory All Cleared Event code 90430000 hex
Meaning The Unit settings were cleared.
Source EtherNet/IP Source details EtherNet/IP
Coupler Unit
Detection
timing
When
commanded
from user
Error
attributes
Level Information Recovery --- Log category Access
Effects
User program
Continues. Operation The Unit settings were cleared.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The Clear All Memory operation
was executed.
--- ---
Attached
information
Attached information 1 and 3: Unit number of the NX Unit where the Clear All Memory operation was per-
formed. If the Clear All Memory operation was performed for the entire Slave Terminal, the information given
will be 255.
Attached information 2 and 4: Execution results
0: Successful
1: Hardware error
2: Initialization failed
3: Initialization not possible
Precautions/
Remarks
Refer to the attached information for the results of the Clear All Memory operation.
To Next Page
Loading...
