12 - 49
12 Troubleshooting
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
12-3 Checking for Errors and Troubleshooting with Support Soft-
ware
12
12-3-5 Event Codes for Errors and Troubleshooting Procedures
Event name Link Detected Event code 98100000 hex
Meaning Establishment of an Ethernet link was detected
Source EtherNet/IP Source details EtherNet/IP
Coupler Unit
Detection
timing
When establish-
ing link
Error
attributes
Level Information Recovery --- Log category System
Effects
User program
Continues. Operation Not affected.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
Establishment of an Ethernet link
was detected.
--- ---
Attached
information
None
Precautions/
Remarks
None
Event name IP Address Fixed Event code 98110000 hex
Meaning The correct IP address has been determined and Ethernet communication can start
Source EtherNet/IP Source details EtherNet/IP
Coupler Unit
Detection
timing
When power is
turned ON to
the EtherNet/IP
Coupler Unit or
the Slave Ter-
minal is
restarted
Error
attributes
Level Information Recovery --- Log category System
Effects
User program
Continues. Operation Not affected.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The correct IP address has been
determined and Ethernet commu-
nication can start.
--- ---
Attached
information
Attached information 1: IP address (example: C0A8FA01 hex = address 192.168.250.1)
Precautions/
Remarks
None
To Next Page
Loading...
