Omron ZFX-C User Manual

Inspection Setup and Measurement
ZFX-C User’s Manual
2
BASIC OPERATIONS
41
Executing automatic setting
1 Either press the AUTO key on the Controller or select
[AUTO] on screen.
When the automatic setting is executed, the following
parameters are set to their optimum values.
• Img Adj (filter setup)
• Limits (Differs according to measurement item.)
• Detail (Differs according to measurement item.)
Automatically made settings can be checked in each of the
setup screens.
AUTO Setting p.178
step 3
AUTO
AUTO
ESC
ESC
SET
Auto
Register model
Reference model
Search region
Reference point
TEA
Region
Img Adj
Detail
Limits
AUTO key
Note

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English