100
Reset Submenu
Parameters Options Functions/Meanings
Reset to
Origin pos Sets the laser head to return to the default origin.
ABS position Sets the laser head to return to the mechanical origin.
Docking Point Sets the laser head to return to the preset origin(s).
Not return Keeps the laser where it is.
X Pwr on reset Ena Enable/Disable Sets the laser head to its X origin upon powering up.
Y Pwr on reset Ena Enable/Disable Sets the laser head to its Y origin upon powering up.
Z Pwr on reset Ena Enable/Disable Sets the laser head to its Z origin upon powering up.
U Pwr on reset Ena Enable/Disable Disabled
To Next Page
Loading...
