76
Leather
When engraving leather products, generally use low to moderate power at high speed. Be
especially attentive to the possibility of fire, as well as the dust produced in repetitive applications.
Despcrition
Thickness
1/16 in. 1/8 in. 1/4 in. 1/2 in.
130 W
Power (%)
17 24 28 37
Speed (mm/s)
40 25 9 6
Despcrition
Thickness
1/16 in. 1/8 in. 1/4 in. 1/2 in.
150 W
Power (%)
17 23 27 35
Speed (mm/s)
45 26 40 7
Metal
This engraver is not designed for cutting nor engraving metals.
Paper and Cardboard
When engraving various paper products, generally use low to moderate power and fast speed.
Test samples from each batch, as only small parameter differences can separate effects that are
too light from those that burn through the substrate. As with leather, be especially attentive of the
possibility of fire, as well as the dust produced in repetitive applications.
To Next Page
Loading...
