1
1.1 Disclaimer
This manual is the designated user guide for the installation, setup, safe operation, and maintenance
of your cabinet laser engraver.
ALL personnel involved in the installation, setup, operation, maintenance, and repair of this machine
should read and understand this manual, particularly its safety instructions. Some components are
extremely high voltage and/or produce powerful laser radiation. Substandard performance and
longevity, property damage, and personal injury may result from not knowing and following these
instructions.
Your engraver may differ somewhat from those shown in this manual due to options, updates,
etc. Contact us if your engraving machine came with an outdated manual or if you have any other
questions.
1.2 Designated Use
This machine is intended for engraving signs and other consumer products on applicable substrates.
This laser can process a wide variety of materials including wood and cork, paper and cardboard,
many plastics, glass, cloth and leather, and stone. Use of this system for non-designated purposes
or materials is not permitted.
The system must be operated, maintained, and repaired by personnel familiar with the field of
use and the dangers of the machine and the material being engraved including its reflectivity,
conductivity, potential for creating harmful or combustible fumes, etc.
Laser beams are dangerous. The manufacturer and/or seller bear(s) no responsibility and assume(s)
no liability for any improper use of this device or for any damage or injury arising from such use.
The operator is obliged to use this cabinet laser engraver only in accordance with its designated
use, the other instructions in its manuals, and all applicable local and national laws and regulations.
1. Safety Information
To Next Page
Loading...
