Thank you for choosing omtech!
Your new
CO₂
laser engraving machine is intended for personal and professional use. When used
following these instructions, it comprises a Class 1 laser system but some components remain
extremely dangerous. Never disable the preinstalled safety engravers and always use your laser
safely and responsibly.
Read this manual carefully before operation. It covers the details of correct installation, adjustment,
maintenance, and—most importantly—safe operation of your new laser. It is intended to be used in
conjunction with your engraving software manual, as the software typically does not only provide
image design but also serves as an alternative interface for the laser settings and machine controls.
You and any other users of this engraver should thoroughly understand BOTH manuals before
attempting to operate the laser.
Keep both manuals for future reference and provide them to ANYONE who will install, operate,
maintain, or repair this machine. Both manuals should be included if this engraver is given or sold to
a third party.
If you have any questions after reading these manuals, please contact us and our support
department will address your concerns as soon as possible.
Preface
Contact Us
Thank you for choosing our laser equipment for your home or shop! For a
.pdf copy of the latest version of this manual, use the appropriate app on your
smartphone or other engraver to scan the QR code to the right.
Come join the omtech community at our official laser group on Facebook or
visit the company forums at omtechlaser.com. Check our YouTube channel for
helpful hints and instructional videos. If you encounter any problem regarding
your engraver, do not hesitate to contact customer service with your order
number at support@omtechlaser.com. Our teams will respond within 24 hours
to make things right. You can also reach us at (949) 438-4949.
Thank you and we hope you will choose us again for all your laser needs!
To Next Page
Loading...
