•
Press .
II/3. Workpiece
A workpiece is a representation of one side of an object.
NOTE:
In most applications, handling workpieces lying on the same side is enough. If
the application should detect an object on dierent sides, create several
workpiece representations for the object, one for each unique side. For
example, a cuboid can have six dierent models, but only three unique ones. A
cylinder can only have two unique models. In most applications, only one
workpiece configuration for each physical workpiece is necessary.
•
To use previously taught workpieces, select them from the list and press
.
To teach new workpieces and to add them to the list, press Add Workpiece.
OPERATION
73
To Next Page
