Oracle X7 series User Manual

Reset BIOS Firmware to Default Settings (Oracle Hardware Management Pack)
Related Information
■
Reset BIOS Configuration to Factory Defaults, Oracle ILOM Administrator's Guide for
Configuration and Maintenance, Firmware Release 4.0.x at http://www.oracle.com/
goto/ilom/docs
Reset BIOS Firmware to Default Settings (Oracle
Hardware Management Pack)
1.
Access the operating system command-line with root privileges.
For more information, see “Accessing the Host Console” on page 38 or “Accessing Oracle
Hardware Management Pack” on page 32.
2.
Type: ubiosconfig reset config
Related Information
■
Updating the UEFI BIOS (ubiosconfig), Oracle Hardware Management Pack Server CLI
Tools User's Guide at http://www.oracle.com/goto/ohmp/docs
Reset Oracle ILOM Firmware to Default Settings
(Oracle ILOM)
Before You Begin
Ensure that you have Admin (a) role privileges in Oracle ILOM.
1.
To reset the Oracle ILOM firmware to default settings in the Oracle ILOM web
interface:
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click ILOM Administration → Configuration
Management, and then click the Reset Defaults tab.
c.
In the Reset Defaults drop-down list, select Factory.
d.
Click Reset Defaults.
102 Oracle X7 Series Servers Administration Guide • September 2017

Oracle X7 series Specifications

General

Management	Oracle Integrated Lights Out Manager (ILOM)
Memory	DDR4
Storage	NVMe
Expansion Slots	PCIe
Form Factor	Rackmount
Operating System	Oracle Linux, Solaris