Oracle X7 series User Manual

Modify iSCSI Virtual Drive Properties (BIOS)
Parameter Example
Target name iqn.1988-12.com.oracle:platform-target
iSCSI initiator name iqn.1988-12.com.oracle:0010E02E458F
Note - iSCSI requires iSCSI Qualified Names (iqn)
formats for its initiator and target names.
Logical Unit Number LUN 0
IP address of iSCSI server 192.167.1.24 (IPv4)
Port number 3260
Modify iSCSI Virtual Drive Properties (BIOS)
Use this procedure to configure iSCSI virtual drives using the iSCSI BIOS Setup Utility
screens.
iSCSI virtual drives are used primarily to run supported operating systems that reside on an
external server and that function as the local server host operating system.
iSCSI virtual drives must be configured in the UEFI BIOS Setup Utility iSCSI screens.
Before You Begin
Ensure that the following prerequisites are met:
■
You are familiar with iSCSI theory of operation and with iSCSI server setup procedures.
■
You have verified that iSCSI targets can be mounted on a client. Review the operating
system documentation for more information.
■
You have access to an external iSCSI server running on a supported operating system.
1.
Access the BIOS Setup Utility.
For instructions, see “Accessing the BIOS Setup Utility” on page 34.
2.
Navigate to the Advanced menu.
3.
Select iSCSI Configuration.
56 Oracle X7 Series Servers Administration Guide • September 2017

Oracle X7 series Specifications

General

Management	Oracle Integrated Lights Out Manager (ILOM)
Memory	DDR4
Storage	NVMe
Expansion Slots	PCIe
Form Factor	Rackmount
Operating System	Oracle Linux, Solaris