Oracle X7 series User Manual

Exit the BIOS Setup Utility
Exit the BIOS Setup Utility
1.
In the BIOS Setup Utility, use the arrow keys to navigate to the Save and Exit
menu.
2.
In the Save and Exit menu, select one of the following options:
■ Save Changes and Exit
■ Discard Changes and Exit
Depending on the selection you made in the Exit menu, the server is reset or the boot process
continues.
Accessing the Host Console
Local Console:The server provides local console access through a terminal or terminal
emulator connected to the serial management port (SER MGT).
Remote Console:You can access the console remotely using one of two methods:
■
A web-based client connection using the Oracle ILOM Remote System Console Plus
application
■
A secure Shell (SSH) client connection to the network management port (NET MGT)
Access the Host Console Locally
This procedure connects to the host console locally using the SER MGT port on the server.
By default, the SER MGT port connects to the Oracle ILOM CLI. Once you are connected to
Oracle ILOM, you can enter a command to temporarily access the host console.
Using Oracle ILOM, you can also configure the SER MGT port so that it connects to the host
console by default. See Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation
Library at: http://www.oracle.com/goto/ilom/docs
1.
Connect a terminal or a terminal emulator to the serial management (SER MGT)
port.
38 Oracle X7 Series Servers Administration Guide • September 2017

Oracle X7 series Specifications

General

Management	Oracle Integrated Lights Out Manager (ILOM)
Memory	DDR4
Storage	NVMe
Expansion Slots	PCIe
Form Factor	Rackmount
Operating System	Oracle Linux, Solaris