Access the BIOS Setup Utility
Access the BIOS Setup Utility
1.
(Optional) Use the Oracle ILOM web interface to select BIOS as the next boot
device.
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click Host Management → Host Console.
c.
In the Next Boot Device drop-down list, select BIOS.
If you select BIOS from the list, next time you boot you do not have to press F2 to access
the BIOS Setup Utility (Step 6 below).
d.
Click Save.
2.
Access the Oracle ILOM CLI using one of the following methods:
■
Launch an Oracle ILOM Remote System Console Plus session.
For details, see “Launching Remote KVMS Redirection Sessions” on page 27.
■
Establish a local serial management connection to Oracle ILOM.
For details, see “Log In to Oracle ILOM Through a Local Serial
Connection” on page 27.
■
From a command line or console on another server, establish an SSH connection to the
server SP. Type:
ssh root@hostname
Where hostname can be the DNS name or the IP address of the server SP.
The Oracle ILOM Login prompt appears.
3.
Type your Oracle ILOM user name and password.
The default Oracle ILOM user name is root and the password is changeme.
The Oracle ILOM CLI prompt (->) appears.
4.
Enter the start /HOST/console command.
The host console prompt appears.
Accessing and Using System Administration Tools 35
To Next Page
Loading...
Need help?
General
