Oracle X7 series - Back up the Current Oracle ILOM Firmware Configuration (Oracle ILOM)

Back Up the Current Oracle ILOM Firmware Configuration (Oracle ILOM)
Note - If you transfer the backup file using TFTP, you do not need to provide a username or
password.
Related Information
■
Back Up the BIOS Configuration, Oracle ILOM Administrator's Guide for Configuration
and Maintenance, Firmware Release 4.0.x at http://www.oracle.com/goto/ilom/docs
Back Up the Current Oracle ILOM Firmware
Configuration (Oracle ILOM)
Before You Begin
Ensure that you have the privileges associated with the following roles in Oracle ILOM: Admin
(a), User Management (u), Console (c), and Reset and Host Control (r).
1.
To back up the current Oracle ILOM configuration in the Oracle ILOM web
interface:
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click ILOM Administration → Configuration
Management.
c.
Select Backup in the Operation drop-down list.
d.
In the Transfer Method drop-down list, select a transfer method.
e.
Specify the destination of the exported configuration.
f.
If you want to include sensitive information in the backup file, specify and
confirm a Passphrase to encrypt the sensitive data.
If you specify a Passphrase, the Passphrase is required to restore the backed up
configuration.
If you do not specify a Passphrase, sensitive data will not be included in the backup file.
Note - Oracle ILOM 3.2.6 or newer provides a selection to include fault data in the backup. It is
reserved for Oracle Service personnel when they replace the SP. It requires a passphrase.
Backing Up and Restoring Hardware and Firmware Configurations 91