Oracle X7 series User Manual

Back Up RAID Controller Configuration (Oracle Hardware Management Pack)
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Hardware Management Pack Server CLI
Tools User's Guide at http://www.oracle.com/goto/ohmp/docs
Back Up RAID Controller Configuration (Oracle
Hardware Management Pack)
You can export the configuration for RAID controllers to an XML file, which can then be used
to import (restore) that information, for example if the controller needs to be replaced.
This command creates a single XML file containing configuration information for all the RAID
controllers in the system.
Note - When you import the file, it detects any RAID controllers that are unconfigured, and
updates only those.
1.
Access the operating system command-line with root privileges.
For more information, see “Accessing the Host Console” on page 38 or “Accessing Oracle
Hardware Management Pack” on page 32.
2.
To export a configuration and write it to a file, type:
raidconfig export config filename.xml
Oracle Hardware Management Pack creates an XML file containing the RAID controller
configuration information. Unless you specify a path name, it places the file in your current
location.
Related Information
■
Exporting or Importing a RAID Controller Configuration (raidconfig), Oracle Hardware
Management Pack Server CLI Tools User's Guide at http://www.oracle.com/goto/ohmp/
docs.
Restoring Saved Firmware Configurations
To recover from unwanted configuration changes, you can revert the server BIOS, Oracle
ILOM firmware, or RAID settings to a configuration that was previously saved in an XML file.
94 Oracle X7 Series Servers Administration Guide • September 2017

Oracle X7 series Specifications

General

Management	Oracle Integrated Lights Out Manager (ILOM)
Memory	DDR4
Storage	NVMe
Expansion Slots	PCIe
Form Factor	Rackmount
Operating System	Oracle Linux, Solaris