BIOS Setup Utility
CLI Tool Description
fwupdate
Update Oracle ILOM and BIOS; or query, update, and validate firmware versions
on supported SAS storage devices, embedded SAS storage controllers, SAS
storage expanders, storage drives, InfiniBand controllers, and Fibre Channel
controllers.
raidconfig
View or create RAID volumes on storage drives that are attached to RAID
controllers.
ilomconfig
Restore, set, and view Oracle ILOM settings, such as network management,
clock configuration, and user management settings.
hwtmgmtcli
Monitor system health.
ipmitool
After loading the requisite driver, use Oracle Hardware Management Pack to read
sensor data repository (SDR) data and display other information about the server.
You can also get and set LAN configuration parameters and perform chassis
power control operations.
nvmeadm
Manage NVM Express (NVMe) devices. This includes viewing information
about and updating NVMe controller and flash device configuration.
itpconfig
Configure Oracle ILOM to forward SNMP traps to the host or a configurable
destination.
Oracle Hardware Management Pack
Documentation
For detailed installation and usage information about Oracle Hardware Management Pack, refer
to the Oracle Hardware Management Pack Documentation Library at http://www.oracle.com/
goto/ohmp/docs.
BIOS Setup Utility
The BIOS Setup Utility is part of the BIOS firmware embedded on the system. Using the BIOS
Setup Utility, you can view server settings and configure system functions, such as the boot
order.
You can launch the utility locally or remotely by interrupting the server boot process. To access
the BIOS Setup Utility, see “Accessing the BIOS Setup Utility” on page 34.
For more information about the utility, see the following sections:
■
“BIOS Setup Utility Tasks” on page 20
■
“BIOS Setup Utility Documentation” on page 20
Overview of System Administration Tools 19
To Next Page
Loading...
Need help?
General
