Oracle X7 series - Restore a Saved BIOS Firmware Configuration (Oracle Hardware Management Pack); Restore a Saved Oracle ILOM Firmware Configuration (Oracle Hardware Management Pack)

Restore a Saved BIOS Firmware Configuration (Oracle Hardware Management Pack)
■
username and password are your credentials on the remote system where the backup
file is saved.
■
host is the IP address or hostname of the system where the backup file is saved.
■
filepath is the relative path to the backup file.
Note - If you transfer the backup file using TFTP, you do not need to provide a username or
password.
Related Information
■
Restore the Oracle ILOM Backup XML File, Oracle ILOM Administrator's Guide for
Configuration and Maintenance, Firmware Release 4.0.x at http://www.oracle.com/
goto/ilom/docs
Restore a Saved BIOS Firmware Configuration
(Oracle Hardware Management Pack)
Before You Begin
Ensure that you have root privileges.
1.
Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 32 or
“Accessing the Host Console” on page 38.
2.
Use the ubiosconfig import command:
ubiosconfig import all --xmlfile=filename.xml
Related Information
■
Updating the UEFI BIOS (ubiosconfig), Oracle Hardware Management Pack Server CLI
Tools User's Guide at http://www.oracle.com/goto/ohmp/docs
Restore a Saved Oracle ILOM Firmware
Configuration (Oracle Hardware Management
Pack)
Before You Begin
Ensure that you have root privileges.
98 Oracle X7 Series Servers Administration Guide • September 2017