Oracle X7 series User Manual

Assign System Identification Information (Oracle Hardware Management Pack)
■
SP System Identifier
■
SP System Contact
■
SP System Location
d.
Click Save.
2.
To assign system identification information from the Oracle ILOM command-line
interface (CLI):
a.
Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
Use the set command to set one or more identifiers:
set /SP [hostname=hostname] [system_identifier=id] [system_contact=name]
[system_location=building_floor_lab]
Related Information
■
Setting Identification Labels for a Managed Device, Oracle ILOM Getting Started Guide,
Firmware Release 4.0.x at http://www.oracle.com/goto/ilom/docs
Assign System Identification Information (Oracle
Hardware Management Pack)
1.
Access the operating system command-line with root privileges.
For more information, see “Accessing the Host Console” on page 38 or “Accessing Oracle
Hardware Management Pack” on page 32.
2.
Use the ilomconfig modify command to set one or more identifiers:
ilomconfig modify identification [--hostname=hostname] [--system-contact=system_contact]
[--system-location=system_location] [--system-identifier=system_identifier]
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Hardware Management Pack Server CLI
Tools User's Guide at http://www.oracle.com/goto/ohmp/docs
Configuring Oracle ILOM 67

Oracle X7 series Specifications

General

Management	Oracle Integrated Lights Out Manager (ILOM)
Memory	DDR4
Storage	NVMe
Expansion Slots	PCIe
Form Factor	Rackmount
Operating System	Oracle Linux, Solaris