16. Wi-Fi/Bluetooth
471
End Bluetooth Connection
To terminate the Bluetooth connection, turn off the Bluetooth function of the
camera.
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ Select [OFF]
0 The paired smartphone is registered as a paired device.
0 During Bluetooth connection, [ ] is displayed in the recording screen.
When the Bluetooth function is enabled, but a connection is not established
with the smartphone, [ ] appears translucent.
0 Up to 16 smartphones can be registered.
If you try to register more than 16 smartphones, the registration information
will be deleted from the oldest first.
0 (iOS devices) If the Wi-Fi connection attempt fails during Bluetooth
connection, follow the message displayed to allow connection to the camera.
If you still cannot connect, select the SSID of the camera on the Wi-Fi setup
screen of the smartphone to connect. If the SSID is not displayed, turn off and
on the camera, then perform the Bluetooth connection settings again.
0 Even if you terminate the connection, the pairing information for it will not be
deleted.
To Next Page
Loading...
