16. Wi-Fi/Bluetooth
472
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
1
Enable the Bluetooth function of the camera.
0
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [ON]
2
On the smartphone, start up “LUMIX Sync”.
0
If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
3
Select [ ].
4
Select [Bluetooth Setup].
5
Turn Bluetooth ON.
6
From [Camera registered] items, select
the camera’s device name.
0 Even if you set up pairing with more than one smartphone, you can only
connect to one smartphone at a time.
0 When pairing takes some time, cancelling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in the
camera being detected correctly.
LUMIX Sync
Bluetooth
XXXXXXXX
To Next Page
Loading...
