Pentax R-200 Series - Page 119

54
Press [ENT] to open the PN input screen.
Input your desired point name by pressing each keys, and press [ENT] to view X screen.
Press [ENT] to open the X coordinate input screen.
Input your desired value by pressing each keys and press [ENT] to go Y coordinate.
Press [ENT] to open the Y coordinate input screen.
In the same manner, input your desired value by pressing each keys and press [ENT]
to open the Z coordinate input screen.
Input your desired value by pressing each keys and press [ENT] to open the PC,
Point Code, input screen.
Ｓ１
Ｓ１