Pentax R-200 Series User Manual

90
( Same procedure is performed at AUX )
Press [ENT], and set the PC to be ready to receive.
13.3 Communication setup
The communication parameter is set when stored data is received or sent between the instrument
and the PC etc.
13.3.1 Receiving data setting
Select the 4. COMMUNICATION SETUP and press [ENT] to view the COMM. SETTING SELECTION.
[1. RECEIVE RECT. DATA]
Select the 1. RECEIVE RECT. DATA and press [ENT] to
view the following screen. Press [ENT] to open the
selection window.
Select each setting and press [ENT].
Press [ACCEPT] to enter when all selections are finished.

Pentax R-200 Series Specifications

General

Brand	Pentax
Model	R-200 Series
Category	Measuring Instruments
Language	English