Pentax R-200 Series User Manual

89
Set the PC to be ready to send and press [ENT] to receive the data from the PC
.
13.2 Output to the PC
The data stored in the internal memory is sent to the PC etc.
[ RECT. DATA]
Select the 2. SEND RECT. DATA by pressing the down arrow key, and press [ENT] to view the
FORMAT SELECTION screen.
Select DC1 format and press [ENT] to view the DATA SEND. CONFIRMATION screen.
( Same procedure is performed at CSV )
Press [ENT], and set the PC to be ready to receive.
[POLAR DATA]
Select the 3. SEND PLAR DATA by pressing the down arrow key, and press [ENT] to view the
FORMAT SELECTION screen.
Select DC1 format and press [ENT] to view the DATA SEND. CONFIRMATION screen.

Pentax R-200 Series Specifications

General

Brand	Pentax
Model	R-200 Series
Category	Measuring Instruments
Language	English