23
• The Focus ring rotation “clockwise” makes it possible to focus on closer objects and
“counter clockwise” will focus on further objects.
3.8 Attachment and detachment of tribrach
The tribrach of R-202NEand R-205NE can be detached from the instrument, if required when
replacing the instrument with a prism for example.
[Detachment]
First loosen the recessed screw with a screwdriver, then rotate the locking knob until the
arrow points upward, and lift the instrument up.
[Attachment]
Mount the instrument on the tribrach with the guide marks coinciding, and rotate the locking
knob until the arrow points downwards.
The guide and guide mark must be fitted to attach the instrument.
When the tribrach does not need to be attached or detached, or the instrument is to be
transported, tighten the recessed screw with a screwdriver to fix the locking knob.
Guide mark
Tribrach locking lever
Recessed screw
To Next Page
Loading...
Need help?
General
