29
Press [F5] [MODE] to enter MODE B.
Press [F2] [ANG SET] to display the ANGLE SET
screen.
Press [F4] [ ] to move the cursor to
“3. R/L REVERSE”.
Press [F5] [SELECT] to add a minus sign (-) to the
horizontal angle value as a counter clockwise angle.
• To return the horizontal angle from counter clockwise to clockwise, also take the above
same procedures, press [F5] [SELECT] to select the clockwise angle.
• When the counter clockwise horizontal angle is selected, the order of aiming at the targets
becomes the reverse (the right one first, then the left one) of the order for the clockwise
angle.
To Next Page
Loading...
