5–20
Eco Idle display setting
Eco Idle stop time display interlocking can
be switched on and off by switching the
indicator light display setting between “dsp
On” and “dsp OFF”.
How to switch display
1. Enter the customize routine setting mode
by pressing the reset button for more than
3 seconds. (See “Selection display” for
indication sequence)
2. Every time you press and hold the display
selection for more than 1 second, “dsp
On” and “dsp OFF” are switched.
NOTE
If there is no operation for about 10
seconds, engine is OFF or vehicle speed
is more than 2km/h, the display will revert
to odometer.
Display setting Eco indicator light
The eco indicator light comes
on during fuel - efficient
driving.
The eco indicator light is
always extinguished.
NOTE
If there is no operation for about 10
seconds, engine is OFF or vehicle speed
is more than 2km/h, the display will revert
to odometer.
The Eco indicator can be switched on or off
by switching the Eco indicator light display
setting between “Eco On” and “Eco Off.”
How to switch display
1. Enter the customize routine setting mode
by pressing the reset button for more than
3 seconds. (See “Selection display” for
indication sequence)
2. Every time you press and hold the display
selection switch for more than 1 second,
“Eco On” and “Eco Off” display are
switched.
Eco indicator light display setting
Sect 05_EN D42L.indd 20 04/11/2019 10:42 AM
To Next Page
Loading...
